The Security Wrench works with all of security hardware that we offer. Nonetheless and apparently like you, I prefer that my picture frames hug the wall from top to bottom. Use the fasteners provided with the frame to secure the backboard in the frame.

Manage Consent. Your post was a little hard to follow. 3. To use Frame-Lock Security Hangers on a wood picture frame, a second matching bracket (included in wood frame sets) must be attached to the back side of the frame's top rail. I wasn’t that happy with how that turned out. Secure the fastener. I am not sure how much success you could have by routing recesses into ¼” MDF.

The #11 Profile category (and compatible profiles) constitute probably 95% of the current metal moulding market. Metal sectional frames do not need any hardware to be placed on the frame itself--the "universal" channel on the back side of the metal frame accepts the bracket flange and T-Head screw. Secure the teeny tiny screw. Latest Blog Entries | Adjust until it’s level. a challenge, perhaps? Your woodworking skills are displayed for several lifetimes in each project. I temporarily attached the 1″ lever fastener to the back of the frame using scotch tape. Found in my projects.

A small crew is still safely shipping orders daily from our warehouse in Wilmington, NC. LJ will not be held liable for the actions of any user. 2. That’s actually a great idea. -- Jerry, making sawdust professionally since 1976. Chat with your Forum Friends about their projects, their life, thei... Makita Battery Charger seems dangerous to me, anyone else have similar issue.

So it will mount flush to the wall. Each size is available in a version for wood frames and a version for metal sectional (Nielsen type) frames. This gives a small shadow line and hides the hardware, while keeping the frame tight to the wall. If the MDF backer is ½” thick, it seems to me that the MDF could be secured flush to the frame by routing a shallow relief in the back and frame into which a screw through a small fender washer could be recessed. Need a break from all the standing and wood dust? Hang your picture on the wall and enjoy! The screw would be sunk into the frame and the fender washer would over lap and catch the MDF back.

Press firmly on the back of the tape to ensure it is well adhered to the mat. Only very minimal leveling adjustments are possible after installation so it is imperative to mount cleats as level as possible the first time.If you are using a Light-Duty Cleat Hanger... A thin, long-handled crescent wrench can be used instead of a Security Wrench to lock or unlock frames, but we all know that having the right tool for the job makes all the difference. If you are a carver or want... Intarsia, fretwork, intricate design cutting and more! Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. frustrations?

Aluminum Cleats with Security Hardware offer quicker installation time because leveling is much easier with cleats. In this configuration, the top of the fame generally stands off the wall while the bottom of the frame is in full contact with the wall. This forum is for scrollsawers: share your tips, ask questions... Have a question? Make sure the glass on the inside of the frame is clean before inserting the picture, mat, and backboard into the frame.

« back to Designing Woodworking Projects forum. That content, advertising space or post may not always be identified as paid or sponsored content.

Make sure that you position it close enough to the inside edge of the frame so that when the lever is turned, it will hold the frame back firmly in place. Multiple picture installations take significantly less time to complete.Frame-Lock Hangers are supplied in three bracket lengths: 6" long for pictures up to 20" wide, 12" long for pictures 20" to 30" wide, and 18" long for pictures over 30" wide. This would allow the frame to set flush or nearly flush with the wall.

Note: Do this at the same time with both hands. The light weight cleats also can support up to 50 pounds so they provide more weight support than just a security kit with wall brackets. I was holding my camera when I took this photo so my right hand was occupied. Hang your picture frame. This strip could be cut to length, thus harvesting the wooden clips. But amid my confusion I will weigh in.

This blog accepts forms of cash advertising, sponsorship, paid insertions or other forms of compensation. | Privacy Policy Please refer to the parts lists below for the specific hardware components contained in each set.Brackets are made of extruded aluminum and are 1 1/8" wide by 1/16" thick.

My original idea was to route in the back mdf panel for one of these french cleat things to fit in. I accepted your invitation and looked at some of your projects; all very nicely done! There is no difference in the bracket profile supplied for wood and metal frames--they can be interchanged if necessary.To use Frame-Lock Security Hangers on a wood picture frame, a second matching bracket (included in wood frame sets) must be attached to the back side of the frame's top rail.

I am not sure how much success you could have by routing recesses into ¼” MDF. Learn how to use canvas clips as a framing solution when your stretched canvas is deeper than the rabbet of the frame, or offset clips for securing canvases that are lower than the back of the frame, as well as for attaching linen liners. Anyways I did something similar to the washer idea, but used the things used for picture frames. You can substitute different fastener hardware if you prefer.The 6" cleats have two prepunched slotted screw holes, four inches on center. Using a jig is like having a couple extra hands helping out. That would mount to the poplar frame and swing over the back panel to hold it in place. tips? Share your "joinery" discussion here. Wood, your hand tools, you and a little know-how. This is the method I like over the fender washer idea. The routed recesses would be deep enough and wide enough so the wooden clips would set flush with the back face of the frame. I personally see nothing wrong with a pair of small eye hooks that supports a wire for hanging a picture frame on a nail or picture hanging hook. Questions and answers about CNC machines, tooling, best practices, and projects. The Frame-Lock security hanging system uses a low-profile aluminum bracket to attach pictures to the wall at the top rail of the picture frame. The finish, whether paint, wax, stain, or something else, can make or break a project. Your email address will not be published. You can also see how I routed out the top for the french cleats. This alternative would require a length of 1/8” thick project wood about ¾” wide.

| Copyright I have used those metal clips (“Z” clips) to hang mirrors on the wall. The wooden clips would fit into a routed recess in the frame and MDF. Latest Forum Topics. Your information will *never* be shared or sold to a 3rd party. Latest Projects | We provide museum-quality digital printing services, custom wood, metal, and canvas frames. But the pointed ends of the screws that secure the French cleat into the recess in the MDF back could be filed flush; preventing the point of the screw from piercing the picture mounted in the frame. Looking for information on designing your projects? Secure Mat and Picture by Firmly Pressing Tape Down Turn the mat and attached page face down on your clean work surface.

I guess I wasn’t thinking clearly when designing this frame. | Share your tips and challenges ... Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Pan head screws would work but could scratch the wall since the pan head screw could set proud of the frame, unless the recess is routed deep enough to allow the pan head screw to be recessed below the back face of the frame.

If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. Currently the mdf back is flush with the back or poplar frame. If the screw hole in the wooden clips is countersunk, bugle head screws could be used. Does this method mean I never have to go back and readjust my picture frames? In this case flush mounting the screw/fender washer backer retainers and French cleat may be required. Different wood requires different woodworking strategies - from cutting to finishing. Wilmington, North Carolina 28403. No. I have these metal french cleat style things, I was planing to use to mount it to the wall. We are open with most of our team working remotely. Get the latest DIY projects, organization ideas, tips & tricks and more delivered to your inbox! Since you are not particularly fond of the way the surface mount clips hold the MDF back in place, I think you could replace them with shop made recessed wooden clips as an alternative to fender washers. Terms of Service This forum is for all the woodturners out there. If you go this way,make a few extra wooden clips in case one happens to crack when installed. Looking for help with ... Are you unsure of which tools, or hardware, you need, or which brands to buy? No, I do not believe that a picture frame hung on the wall that does not set flush against the wall is unprofessional. Then give the bottom corners with the bumpers a little push. 44 Darlington Avenue | Do Not Sell My Data Light-Duty Cleat Hangers are normally attached to the wall with the screws and plastic anchors supplied. Having difficulties reading project plans? Slap your level on top. Log in. After this bracket is in place, a locking T-Head screw is connected to the bottom rail to secure the frame.The Frame-Lock bracket makes it very easy to create a level hanging point at the top of the picture--no need to carefully space apart and level two separate smaller brackets or hangers as with other security hanging systems. This includes the metal moulding currently made by Nielsen, Clark, Designer, Alumaframe, Global Art, MCS, Decor and most OEM manufacturers. The compensation received may influence the advertising content, topics or posts made in this blog. I think I might just do that washer idea. Without it, wall surfaces tend to get scuffed, fingers pinched and nerves frazzled.If you do not already have one on hand, it is strongly recommended that you purchase at least one Security Wrench to facilitate the installation of security... Frame-Lock Hangers will fit on all currently manufactured metal frames generically designated as #11 Profile moulding. I’ve actually already built a frame similar to this, but alot bigger. But the pointed ends of the screws that secure the French cleat into the recess in the MDF back could be filed flush; preventing the point of the screw from piercing the picture mounted in the frame. A shallow relief could be router into the MDF to receive the French cleat hardware shown into your post.

The wooded clips would be set in the recess, overlapping the MDF back panel and be secured using a screw into the frame. I add a small strip of wood around the perimeter of the frame—on the back side—-just slightly thinner than the clip, and inset slightly from the edge. Have you had to compromise your project... On the lathe, by the lathe: do you have questions? DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. It could be difficult to find screws short enough for attaching the French cleat. Wouldn’t a gap between the wall and frame look weird or not professional? I’m trying to figure out the best way to secure the back to the frame. ©2020 Verticalscope Inc. All Rights Reserved. a tip/strategy to share?

Eyes, ears, fingers, and... Are you looking for or do you have tips to share regarding the workshop?